GMB74's latest activity
-
GGMB74 replied to the thread It's been awhile. Crazy findings,awesome literature!.A while back, a member on this site, or possibly the other site got a 4-stroke saw called a Senix. The first one had problems, so the...
-
GGMB74 replied to the thread It's been awhile. Crazy findings,awesome literature!.The add I pulled up is selling it a lot cheaper, but it doesn't come with batteries. It's also advertised as 29.8KW (almost 40 HP!) A...
-
GGMB74 replied to the thread ring & pinion seal replacement crush sleeve question.Ditto on what Redline4 and Shane1 have written. It may not be how an engineer would do it, but that's how it gets done All day every day...
-
GGMB74 replied to the thread Honda GX120 on pump.Take a fuel sample. Water or Diesel in the tank? Did it over-rev and bend a pushrod/ pop off a rocker? When taking a compression...
-
GGMB74 replied to the thread Oil Capacity for Troy-Built Power Washer, Briggs Quantum 6.5 HP?.20 oz. should be correct for this engine. Double check with the dipstick, if it has one, or the method mentioned above by Hacskaroly if...
-
GGMB74 replied to the thread Briggs 190cc.Try it with the proper air filter and cover on. Some of these engines are jetted so lean (for emissions) that they need a little...
-
GGMB74 replied to the thread Briggs 190cc.You have some good advise here to get you started. Can you post the Model and Spec numbers from the engine so we can see what style of...
-
GGMB74 replied to the thread HELP! Where to find fuel lines impulse line and filter for a John Deere cs 62 and cs 71 chainsaw?.According to the IPL the part number you are looking for is PS10188 for both saws. The picture only shows a short length of hose, so...
-
GGMB74 replied to the thread Surging Engine, despite usual remedies.I think you were on the right track to begin with. The engine is running lean. Have you modified the air filter in any way? Too little...
-
GGMB74 replied to the thread Digital Calipers -- Long overdue.Like most inexpensive goods from China, the quality of these tools is erratic. I have two of these calipers. One has been great...