ferris's latest activity
-
ferris reacted to Redbull661's post in the thread 661 muffler mod progression w/thermocouple with
Like.
Did this back on Dec 1st when it was still warm. Now that it's -22 and I don't want to go outside... This is a completely stock 661... -
Outside the box? I ran the box over…prolly don’t try at home
-
ferris reacted to Squareground3691's post in the thread Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread with Like.
-
ferris reacted to Wilhelm's post in the thread Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread with Like.
Anyone in Germany can get them. Or whomever within the Europe Union still has a good Dolmar dealer. Do not look at me, don't no more. I...
-
ferris reacted to Shane¹'s post in the thread Dolmar 64xx/73xx/79xx series, smurfs and solo 665/675/681 thread with Like.
Redhead up and running solo crank heated handle 7900. Think this is my new favorite saw and I haven't even cut with it yet lol
-
I had this dude helping load the truck in the mountains here a couple years back and he asked me to spray full strength deet on his...
-
Best oil ever… 😎😂
-
It’s been a couple weeks since the saw was run, so some of the oil has drained off the crank. There is a puddle in the bottom of the...
-
so 40:1 ?
-
Crank looks dry as a cork. For what it’s worth, 50:1 mixed with vegetable oil leaves a nice sheen on the piston. 100:1 with good oil is...
-
This is sufficient loob—RA at 50:1. Although it doesn’t keep the bearing pockets on these garbage Husqvarna crankcases from wearing out...
-
ferris reacted to Maintenance Chief's post in the thread The forestry and logging pictures thread with Like.
Swing cut?
-
ferris reacted to woodfarmer's post in the thread The forestry and logging pictures thread with Like.
This last one really tested the old CaseIH and maple to boot
-
ferris reacted to woodfarmer's post in the thread The forestry and logging pictures thread with Like.
So this big beech was leaning a few different directions, concerned about the widow maker. I chose a direction and was a bit off. Made...
-
It does lose some case capacity but it’s not enough to change how they run. It’s purpose is to deflect charge up into the wrist pin for...