ferris's latest activity
-
I have a few Stihl 08S saws that run 17" or 21" 404. They use it to try and create some chain speed for the low reving older stuff -
In the past, emphasis was placed on the durability of the chain and saw, and only later the speed was increased and the weight of the...
-
It was common to find a 54cc McCulloch or others with .404 chain.
-
Solo 50 is the company's third 50cc chainsaw with a 404 chain / The Stihl company also released saws with this chain later in the 1960s...
-
This is on the edge of what it can do but it did get the job done for me for a while until I bought a bigger saw. It has spend most of...
-
The P100 SUPER turns slower but is harder to stop with this setup
-
Dolmar 7900 pulling a 24", 76DL 404 chain just because it can
-
ferris reacted to isaaccarlson's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with
Like.
There is a small roll pin. Then remove the adjuster and the shaft should come out. It is spring loaded, so be careful. -
ferris reacted to isaaccarlson's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
An angled oiler hole prevents clogs. A straight hole collects crud and packs in tight, but the angled hole lets the chain pull the crud...
-
ferris reacted to Wilhelm's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
Das ist doch was Ich die ganze Zeit sage! Die winzigen Oel einlass Loecher sind eine reine Umweltschohnung Sache, nicht eine...
-
ferris replied to the thread Stihl oiler upgrades. Please post compatible saws and oilers..@whilhelm sure a bigger hole can flow more oil. But the pump dont pump more oil because of that. So the theory of the new fancy oil...
-
ferris reacted to lehman live edge slab's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
Well maybe Stihl knows nothing and wants to sell you less bar oil and one extra bar every few years, could also see when pumping oil at...
-
ferris reacted to SawAddictedFarmer's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
I got the pump out of a 500i and it worked considerably better so I called my dealer and said I've got a bad pump in a 462 can you get...
-
ferris replied to the thread Stihl oiler upgrades. Please post compatible saws and oilers..U should do some math and u will find out that the tiny Stihl oil hole will flow more oil then any oilpump can pump.
-
ferris reacted to Wilhelm's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
Use thinner oil and more of it will get to where it is needed. High viscosity & tacky is not Your friend when it comes to lubrication...