ferris's latest activity
-
Lad, if I typed the way I speak you wouldn't understand a fcuking word. -
Another spruce. It never ends. Took 1/3 of the tree, then another 1/3 then aaron felled the rest At least there was no ivy on...
-
ferris reacted to SawAddictedFarmer's post in the thread HELP! So where do we go from here folks? with
Like.
This 125% -
Very good point. I’m just a casual member these days myself. I just don’t spend as much time in this scene as I did 3-5 years ago &...
-
Then, how do I know how to respond? Just asking.
-
ferris replied to the thread Foam filter? Or leave it with the stock filter? MMWSms462.U dont reset them after porting?
-
I was replacing the clutch springs on a Ms250 and it dawned on me they are the same clutch and drum. Then I spent a few weeks wondering...
-
ferris replied to the thread Saw video thread.Nice to see that it worked, but why? Can’t make fun in my opinion. Put that bar chain combo on a very big saw, that would make fun
-
I had a dumb idea that actually worked for once 56DL, .325, 063 setup on a MS170. Took a little bit of messing around to make it work...
-
We finally cut this tree into firewood today. It was very spongey for the bottom 20 feet or so. Definitely a good thing we felled it...
-
ferris reacted to Mastermind's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
No. Never reset it unless you change the solenoid.
-
ferris reacted to Mastermind's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
Here's the thing. If I miss two weeks, saws keep coming, and I'm another month behind.
-
ferris reacted to ZERO's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
Randy hope all is well with your medical. Do not over do it during recovery, you don't want any medical set backs. Good customer...
-
Did some freehand ripping today. Easier than expected. Normal chain
-
ferris reacted to huskihl's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
With air injection I wouldn’t think it would really be necessary. The two-piece cover saws benefit from it because there’s no air...