ferris's latest activity
-
I had a dumb idea that actually worked for once 56DL, .325, 063 setup on a MS170. Took a little bit of messing around to make it work... -
We finally cut this tree into firewood today. It was very spongey for the bottom 20 feet or so. Definitely a good thing we felled it...
-
ferris reacted to Mastermind's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with
Like.
No. Never reset it unless you change the solenoid. -
ferris reacted to Mastermind's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
Here's the thing. If I miss two weeks, saws keep coming, and I'm another month behind.
-
ferris reacted to ZERO's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
Randy hope all is well with your medical. Do not over do it during recovery, you don't want any medical set backs. Good customer...
-
Did some freehand ripping today. Easier than expected. Normal chain
-
ferris reacted to huskihl's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
With air injection I wouldn’t think it would really be necessary. The two-piece cover saws benefit from it because there’s no air...
-
ferris reacted to hacskaroly's post in the thread Foam filter? Or leave it with the stock filter? MMWSms462 with Like.
Welcome to the Forum!! I only have one saw that is running a foam filter, only because the originals are no longer made and there are...
-
What I like is that it looks like it came from the factory that way.
-
395XP with @tree monkey large deflector with a Husqvarna screen and Stihl exhaust gasket. All three line up perfectly and work together...
-
Let's not forget 4 stroking is so rich the engine is misfiring. Its an easy way for guys to tune to, but not great way performance wise...
-
Try a reset?
-
Or even 32:1. Strato really changed alot in this regard. As you increase fuel economy you also decrease lubrication.
-
I think it’s more important now than ever to run 40:1 or better with modern saws.
-
It's fine in the cut. Out of cut and idle is like it's running out of fuel all the time. Something that bothers me personally.