FergusonTO35's latest activity
-
FergusonTO35 reacted to hacskaroly's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Just in time, good to see that it is working out for you!! -
FergusonTO35 replied to the thread HUSQVARNA HUSQVARNA THREAD.So far she cuts great, at least on the small stuff I use it for.
-
FergusonTO35 reacted to lehman live edge slab's post in the thread HUSQVARNA HUSQVARNA THREAD with Like.
Definitely a tune in cut saw
-
I have two "free" Stihl hats. I reckon each one cost me about $1000.
-
FergusonTO35 reacted to redline4's post in the thread Random pics (that you took) thread... with Like.
Saw these in Cody. There are so many old trucks rolling out there it's crazy. I think the one is a Ford Courier. Had a pair of 2 stroke...
-
FergusonTO35 reacted to Squareground3691's post in the thread Random pics (that you took) thread... with Like.
Sweetie,
-
The robot is getting closer.
-
FergusonTO35 replied to the thread Fergy giving me fits.There is not a little controversy about using modern GL-5 spec 80w90 in old tractors. Supposedly, the extreme pressure additives can...
-
I think it's got 80-90 but with the loader I haven't used the three point in decades .The other TO 20 I have at the house also has 80-90...
-
FergusonTO35 replied to the thread HUSQVARNA HUSQVARNA THREAD.I checked it with my tach today, and she is doing around 3000 at idle and 12600 WOT. So, I guess I am in good shape. The 194 manual says...
-
The exact idle speed is not that important. According to manufacturers, the most common tolerance for its setting is ±200 rpm, which...
-
FergusonTO35 replied to the thread Fergy giving me fits.On my TO-35, the timing marks are on the flywheel and viewed through a plug on the left side of the engine. Yeah, these tractors just...
-
I might add these were good old loaders .They'll lift over a ton .How ever with no power steering it's a job to get them to turn with a...
-
Now I have turned wrenchs on old rusty machinery since I was15 years when I rebuild my first tractor engine,a1938 Allis Chalmers model B...
-
FergusonTO35 replied to the thread HUSQVARNA HUSQVARNA THREAD.I have also found that when the chain is too tight it can stall the saw when you release the trigger. It's as if the extra tension can...