FederalQ's latest activity
-
FederalQ reacted to I saw a lot's post in the thread Firewood thread!!! Let's see what you got!!!! with
Like.
Picked up a load last weekend from a friend who wanted it cleaned up. Split it up today but not too sure how much I will keep vs. get... -
FederalQ reacted to Lawless's post in the thread Firewood thread!!! Let's see what you got!!!! with Like.
-
-
FederalQ reacted to Philbert's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
How I was taught by by STIHL dealer! Philbert
-
FederalQ reacted to bwalker's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
If needed, yes. As for proper tools. Most dealers do the same thing.
-
FederalQ reacted to Wolley's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
The dukes one says in the picture m22x1.5 and m26x1.5. or just measure the saw ur working on.
-
Thanks for letting me join. @huskihl thanks for the helping guidance!
-
FederalQ replied to the thread Making my own flywheel pullers for Stihl equipment (and possibly others).https://shop.saegenspezi.de/flywheel-puller-extractor-fits-Stihl-AV-042-048-050-051-064-066-075-076-084-088-MS640-650-660-661-880-070-090...
-
I picked up a 61 Rancher a short while back along with a couple other saws. It needed a good clean up and going over. I had to...
-
Rapco chain?
-
FederalQ replied to the thread Making my own flywheel pullers for Stihl equipment (and possibly others).https://www.sawsalvage.co/products/two-in-one-flywheel-puller-tool-for-stihl-chainsaws-1110-890-4500
-
FederalQ reacted to bwalker's post in the thread Making my own flywheel pullers for Stihl equipment (and possibly others) with Like.
A sharp tap with a brass hammer works as well as anything.
-
Is anything different besides the recoil handle, chain, and decals?
-
FederalQ replied to the thread HUSQVARNA HUSQVARNA THREAD.The price! I think outfitted 572xp’s are currently in the $2500-$3000 range.
-
Thinking about grabbing a 28” bar for my ms390, it’s got all the mods and some port work. It’s for no real reason outside of not...