FederalQ's latest activity
-
FederalQ reacted to oddsaws's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
https://ebay.us/m/kG2AmI -
FederalQ reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
@S&S_Work_Saws I got a closed port 40 and 44mm cylinder
-
What's the scoop on syrup this year?
-
I worked on a Stihl 192 that had a deformed boot lip due to the outer ring not being lined up properly during prior carburetor work and...
-
Yep, inner ring still there, and the outer one.
-
This makes sense that the fuel was spit back and not leakage through the carb. The inner ring is for sure still on the boot?
-
FederalQ reacted to mgr1's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Last partnr from a 44mm cylinder is: 027 130 034. Those where the replacement cylinders and open port. Oem closed port is 027 130 020.
-
FederalQ reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I recall reding someones comment that Makita began to cut costs and started selling the same P&C kits for the semi pro (aluminium cases...
-
An internal leaking gasket will do such a thing, basically it's a short circuit of sorts.
-
I believe I got it fixed. After I put a new intake boot on it stopped leaking. I guess there just wasn’t a good enough seal between the...
-
Up till about 10 years ago all knowledgeable turbo Subaru guys ran Rotella 5w40 because it had the most zinc in it for a stock on the...
-
XPG'S are here available by mid february.
-
A 42” really? With their suspect AV system and Stihl stingy oiling system this is getting pretty far up the bean stalk
-
The cylinder reminds me of a 592
-
I have another hydraulic dump too and they don’t leak and still dump. I put a million miles on Tonkas but never had these as a kid. I...