FederalQ's latest activity
-
I’ve got the tester Stump Shot posted coming tomorrow. Hopefully I can find the issue. -
Different oils combustion differently and require different tuning.
-
Wouldn't the baseline fuel also affect the results? It's not like we all have access to the same fuel. Edit: Or is it reasonable to...
-
Tip- Soak gaskets in fuel mix prior just to installation so they will swell and seal as well as make sure they are on the proper side of...
-
One for carburetors is fairly affordable. Here's a generic made one...
-
I actually have an aftermarket carburetor coming tomorrow. I do need to order a pressure and vacuum tester.
-
FederalQ replied to the thread Stihl 361 Leaky Carb.If you don‘t have the tools to pressure check things the cheapest option may be to buy an aftermarket carburetor and try it. I know mine...
-
I’d be curious to see this vid and the setup. While you’re 100% correct in dialing in the bore to be straight. Did they hit the base, or...
-
Well, as far as the CNC part goes, I just happened to come across a vidja from another feller doing the same thing to the same saw...
-
Thank you
-
The direct answer to your question is yes, they have more torque with the heavier piston and other updates. However, they are stil not...
-
GB bars new in the box 20.00 each plus shipping The total bars and jonsered bars without packaging 10.00 each plus shipping Total...
-
Echo 9010 blower crankcase. The fan side bearing is a good Japanese NTN but this is the second one I’ve seen with a failed cage. Both...
-
Shrinking an aftermarket 460 3/4 wrap for my 026. 3/4" out of the width, need to drop the top about an inch. Good TIG practice anyway.
-
But there’s only a few that understand reality whether it’s now or 1960, i’m pretty sure it was called. Make *s-word happen!!
