FederalQ's latest activity
-
FederalQ reacted to Squish9's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
Thanks, I will order both and give it a birthday present Might as well just add a pic of what it was doing on the weekend -
FederalQ replied to the thread Carb Settings MS460 Mag.The larger jet may allow you to tune without having to defeat limiter caps.
-
And when the temp changes, humidity changes, altitude changes, load changes, oil ratio changes, fuel changes etc.
-
It doesn't. It adjusts for the variables that effect fuel to air ratio on the fly.
-
3 to 4 oz. per gallon give or take a splash is the precise amount I use for optimum performance and longevity.
-
As have I, 32-ish on break in saws and 40-1 on most everything else unless it seems to be a extra hot running saw or its mid summer and...
-
I have run amsoil dominator at 32:1 in every saw I have ported in the last 4-5 years
-
Never seen that. Same story with Autotune.
-
FederalQ replied to the thread Oil questions....Looking up the specifications of the referenced Dominator 2T oil, it‘s viscosity is listed in the US SAE 20 grade range so it should not...
-
4 ounces per gallon is 32:1. I said 50+ percent. It’s actually 53.8%. Seems quite right to me lol
-
FederalQ replied to the thread Oil questions....32:1 is easy math. An ounce of oil per quart of gasoline. What is that, like 3.165% oil concentration up from 2%?
-
You will not go wrong with @TreeMonkey (Scott Kunz) Just like any of the reputable Saw Porters be ready for a 6 to 8 week wait time.
-
You don’t quite realize the hassle you saved by not messing around with ripsaw. You’d be $400 into a saw that ran little if any better...
-
if your willing to take care of shipping, i can do it for you
-
I second CFB @Canadian farm boy If you were to ship this to the states, you'd likely have to pay duty on it both ways. The duty-free...