FederalQ's latest activity
-
:( -
I'll take the MS462 3/4 wrap(woods ported) if still available. Randy has been great to deal with
-
FederalQ reacted to They call me Mr. Kibbs's post in the thread The Official Craigslist & eBay Thread with
Like.
Love it when they counter with some piddance of a price reduction. Very few things out there I cannot walk away from...good on you -
FederalQ reacted to They call me Mr. Kibbs's post in the thread The Official Craigslist & eBay Thread with Like.
Dang good looking set up. Prob several hundred in the bars if their 1/2 way decent. Have an old 1050 Super with 36" bar, and actually...
-
FederalQ reacted to farminkarman's post in the thread The Official Craigslist & eBay Thread with Like.
Just listed for sale locally:
-
Good afternoon all. I got super lucky and was able to snag this very nice 681 yesterday. Anybody know of anywhere to get a new air...
-
We’ve had a few equipment fires over the years. We lost a dozer a few years ago because we set the extinguisher out to flip the seat up...
-
I've got a couple of those . Will charge up to 160 psi and hold a good bit of water. Funny story. Back in college days we were...
-
Yep, planning to get some of those as well!
-
FederalQ reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
A german collector sent me a used ignition harvested from another DOLMAR 152. It has the same Bosch-number than the faulty one built...
-
FederalQ reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Any 119 or 120 ignition should work too. Just make a mental note of where the flywheel key is early 119 was different than 120 and 123...
-
FederalQ reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I see conversion to ignition chip could be some kind of last resort but would like to avoid such botch-up (no pun intended). I...
-
FederalQ reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
As a last ditch effort could use point conversion transistor chip. Then either slot the holes a lot or use point flywheel. Here is one I...
-
FederalQ reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I tried that one time plate is bigger than dolmar. Tried swapping just the trigger. Couldn't get any of it to work with the dolmar flywheel
-
FederalQ reacted to FATBOY2017's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I have one of these that I want to try to see if it can be adapted to fit Dolmar's. Not had chance yet...