FATBOY2017's latest activity
-
FATBOY2017 reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
Failing coils can cause a number of symptoms from poor restart when hot to not revving clean. Usually it gets worse over time... -
FATBOY2017 replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.I had a DCS 5030 ( UK 51505) do this as Shane said, messed with it for ages, convinced it was a carb issue, Shavey lent me a carb and...
-
FATBOY2017 replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Hi Ernie, I have not had any coil issues with my 6100, but I have heard stories about failures. The part numbers usually...
-
FATBOY2017 reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Yes they are the same besides some of them had the trigger lock button so depending on what carb you have you might want the trigger...
-
FATBOY2017 replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Try https://www.ebay.com/itm/146571703833
-
FATBOY2017 replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.I find the problem is after many years starting saws 'the normal' ways, it's getting your head around how these things work, see...
-
FATBOY2017 replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.It's easier than it looks, if you use the repair manual for the 6100 I posted a couple of threads ago as it's exactly the same...
-
Taking the junk out of some mufflers
-
FATBOY2017 replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.There is quite a few useful bits of info and diagrams in the repair manual,
-
FATBOY2017 reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Now that my 152 is running, I carried my other members of the DOLMAR 144 family of saws into the garden to join for some...
-
FATBOY2017 reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I tried that one time plate is bigger than dolmar. Tried swapping just the trigger. Couldn't get any of it to work with the dolmar flywheel
-
FATBOY2017 reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
As a last ditch effort could use point conversion transistor chip. Then either slot the holes a lot or use point flywheel. Here is one I...
-
FATBOY2017 reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I see conversion to ignition chip could be some kind of last resort but would like to avoid such botch-up (no pun intended). I...
-
FATBOY2017 reacted to Shane¹'s post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Any 119 or 120 ignition should work too. Just make a mental note of where the flywheel key is early 119 was different than 120 and 123...
-
FATBOY2017 replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.I have one of these that I want to try to see if it can be adapted to fit Dolmar's. Not had chance yet...