ErnieG's latest activity
-
ErnieG replied to the thread The Swap Meet Thread.Looking for a Makita ea6100 crankshaft... Thanks Ernie -
I'm in need of a good Makita ea6100 crankshaft. Let me know if you have a good used one for sale or possibly trade ! Thanks very much...
-
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.It's very possible it was ... I purchased the saw with a lot of missing parts so I can't really be sure of its history. Im to far into...
-
ErnieG reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with
Like.
Have one size smaller thread machined onto it and a custom nut made? Would certainly take a skilled machinist to do it. -
ErnieG reacted to Wilhelm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Sorry to say this, but in my book that is now a parts saw. :( If You can find another parts 6100 with a good crank & carb You can...
-
My take on forum direction is this. There ain’t one, it’s several given the members that currently exist here. On one hand you have the...
-
ErnieG reacted to Woodpecker's post in the thread HELP! So where do we go from here folks? with Like.
Yes it was, but apparently not well enough. Sheesh! Microcosm of how quickly and easily things can get misconstrued though fellers.
-
ErnieG reacted to farminkarman's post in the thread HELP! So where do we go from here folks? with Like.
As I recall it was pretty clearly laid out in the sale thread that saws would be gotten as folks had time to make the trip to help.
-
ErnieG reacted to Woodpecker's post in the thread HELP! So where do we go from here folks? with Like.
You do realize all those saws were hours away from Dan right? I think the benefit of the doubt is the least you could give to someone...
-
It may of seemed that way to you. But the amount of saws sold and a 3 hr trip one way can be time consuming,packing, and visit...
-
ErnieG reacted to Woodpecker's post in the thread HELP! So where do we go from here folks? with Like.
Parts were send by @Duke Thieroff last week before the 2152 the big blow up at the end. Thanks for bringing up the phone in the lake...
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Well my problems continue with this 6100 .... I bought a cheap aftermarket coil to try and low and behold it didn't make a difference...
-
-
Let's keep the child side of things better off un said. Dan is not an idiot. Unfortunately the head moderator has done some out of...
-
ErnieG replied to the thread The Swap Meet Thread.https://www.amazon.com/Socket-Screws-Metric-Machine-Threaded/dp/B0969WVVC2/ref=mp_s_a_1_1_sspa?adgrpid=173139159785&dib=eyJ2IjoiMSJ9.FtSl...
-
I understand what you’re getting at. However, being able to speak lewdly and constantly reading that nonsense isn’t a requirement to be...
