ErnieG's latest activity
-
Pics -
Pics
-
Prices for 562 rough shape and 353. 2260 too
-
ErnieG reacted to jacob j.'s post in the thread HELP! Scammer Alert!!!!!!!!!!!! @Cupholder with
Like.
Thanks Aaron - Cupholder is gone. -
ErnieG reacted to aarongd's post in the thread HELP! Scammer Alert!!!!!!!!!!!! @Cupholder with Like.
I was contacted by the newly joined member "Cupholder" He is a scammer. Joined forum Yesterday 30 Mar 2025. He sent me this "Hey how...
-
Ed - start with the basic adjustments first, try setting the L 1-1/4 to 1-1/2 turns out from lightly seated and turn up the idle speed...
-
We moved the Jonsereds saws into the new display area on Saturday, I have a few more in place this morning. I thought the Comet should...
-
ErnieG reacted to av8or3's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
I have always selected slightly forward of center. (Advanced). If there are marks where it WAS , use them.
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.With the ignition there is a small bit of adjustment between the slots ...what would be the best place to set this ? Thanks Ernie I do...
-
-
ErnieG reacted to heimannm's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Many saw manufacturers used the pin hole with a cotter pin vent on oil tanks over the years. McCulloch and Jonsereds immediately come...
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Well I guess that makes sense 😂 Ernie
-
ErnieG reacted to blacksmith's post in the thread UPCOMING Central PA 5th Annual Hawg Day's June 19th, 20th and 21st 2026 with Like.
Well all I have some good news and bad news. Good news is that the club is getting some logging done up on the mountain and part of the...
-
ErnieG reacted to old_sir_henry's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
That is because it isn't leak proof!
-
ErnieG reacted to Partner's post in the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread with Like.
Tilt the saw towards the clutch 😉👍 although there are also saws that have it on the clutch side, we only cut down fallen trees 😁
-
ErnieG replied to the thread DOLMAR/MAKITA The Official Sachs Dolmar Dolmar Makita Dolmar Chainsaws Thread.Working on a 123 and I have a question about the oil reservoir vent . Shows on the parts diagram just a small piece of twisted wire that...
-
