Recent content by eonk

I recently purchased the cs-501p and used it once. It ran fine. About a month later it will start fine and cut, but when i release the trigger, it dies. it has fresh gas. Any thoughts on the problem? I cant take it back to the dealer, but if I am making a silly mistake, I would like to know. By...

Thanks all of you who helped me with my MS 250. I am now working on replacing the fuel line on my 200t. Is there a trick to seating the grommet to the body. I have removed the top handle, but can’t get the grommet in place. I do have the point on the grommet in the correct t position.

Thanks for the advice. Fortunately, my brake is still moving freely. There was a very small amount of plastic melted around around the edge. I haven’t found time to explore why the brake won’t release. Everything moves freely if I remove the brake around the clutch.

The brake is frozen and the plastic melted around the sprocket. I was able to free the sprocket with some effort. I now have to determine why the brake is frozen. Thanks for the advice.

Thanks. I will try that

I recently tried to start the saw and the pull cord wouldn’t come out. I removed the cord and it worked fine. When looking for the problem I tried to remove the chain sprocket and it won’t budge. I suspect that the bearing broke and the pins are jammed in the sprocket. Any suggestions on how to...