emanuel's latest activity
-
EEcho told us 5 years ago that they have the tech on the shelf ready when they need it, but they are extremely gunshy at this point. I...
-
Eemanuel replied to the thread Husqvarna 564xp (g) fuel inject.You can't expect these saw companies to do the heavy lifting in term of R&D for battery development, they just use the current tech that...
-
Eemanuel replied to the thread Husqvarna 564xp (g) fuel inject.Sadly that will probably mean its gonna be sloppy as all hell with anything in the 25-28" range bar, and it will need aftermarket help...
-
Eemanuel replied to the thread Husqvarna 564xp (g) fuel inject.Yea its probably the lighter crank and shorter stroke that they mentioned in the specs they listed. In the usage video it looks like the...
-
EIs it corrosion coming from the carb? I've gotten into the habit of draining the gas in my saws, and putting some alkylate (Stihl...
-
Eemanuel reacted to lehman live edge slab's post in the thread Husqvarna 564xp (g) fuel inject with
Like.
But Stihl does allow purchase of the mdg1 and you can do the reset with it so while they are making it not feasible for a homeowner to... -
Eemanuel replied to the thread Husqvarna 564xp (g) fuel inject.You don't really need an MDG1 because 6 years later and tens of thousands of saws sold we know the computer and injection system is the...
-
Eemanuel reacted to Marshy's post in the thread Diagnosing what caused burnt piston/scoring? with
Haha.
Eggsactly. I watch a guy toast a 660 2 weeks ago by pushing it through a stump (with the grain, like milling) with a dull chain. Just... -
Eemanuel reacted to Wilhelm's post in the thread Stihl NGK spark plugs vs. any ol NGK spark plug? with Haha.
Is this the new oil thread? Asking for a friend!
-
Eemanuel replied to the thread Stihl NGK spark plugs vs. any ol NGK spark plug?.Its the same number because the numbering has a very specific meaning in regards to sizing of the sparkplug, heat characteristic and its...
-
EI've built both. The 1201 is a better built saw. Both need mods to increase the RPM limit.....but the 881 has a terrible oil pump drive...
-
EI would not be cutting down stumps with a 100+ cc saw that has no chain break. It's not worth the risk.
-
EOne of the notable considerations is parts availability. There is no doubt that the 1201 is a nice saw but you will play hell getting...
-
Eemanuel replied to the thread Anyone compare a CS1201 vs MS881?.I agree with you about the oiler, but Stihl offers a high output 1.6mm stroke oiler for it #1124 640 3206 (I have no idea why it doesn't...