EFSM's latest activity
-
EEFSM reacted to Only the Tony's post in the thread how about a Oklahoma,AR,MO,KS,TX,+IA GTG thread? with
Like.
Didn't hit uppers 70's anywhere by me. Lost count of the times I have watched the sun come up in the last few years. Either taking... -
EThe 2nd Gen doesn't cut out of power under heavy loads , like the 1st Gen did,
-
EEFSM replied to the thread Trees you've cut.Echo uses that only on trimmers, other shafted tools, and blowers in the US.
-
EMuffler mod will wake it right up. The difference is amazing. I wouldn’t advance the timing they don’t need it. The 3/8 is horrible on...
-
EEFSM replied to the thread Pliers for Fuel Hoses.Twist the line to break it loose from the fitting before pulling.
-
EEFSM replied to the thread B&S V Twin 16 HP.The ignition is powered from magnets on the flywheel. There are wires going to the coils but those are for “killing” the spark. When...
-
EEFSM replied to the thread So what did you buy today.What do you mean by won’t cut under load?
-
EI bought a 350 with a busted brake handle, and saved the part for friends with problems getting the brake unlocked. Not as handy as the...
-
EI’ve always thought those (on any saw) should have a soft rubber bushing. Something that would firm up the suspension and cushion it...
-
EPhilbert
-
EThe power is much improved , won't cut under load like first Gen , ergonomics. locking spindle , only need one wrench to tighten collet...
-
EEFSM replied to the thread VW TDI talk.Driving through Ohio yesterday I saw gas 259 diesel 429. It’s amazing how prices vary from state to state; I suppose it’s partly due to...
-
EQuite easy, can you open the main page on AS, scroll to the very bottom and in the green bar at the bottom of the page click on, contact...
-
EEFSM replied to the thread So what did you buy today.Is it mainly just a different trigger setup? I’d say their first try at it was pretty well executed.
-
EGen 2 Right Angle Grinder, much improved