EFSM's latest activity
-
EEFSM replied to the thread STIHL The Official Stihl Chainsaws Thread.Can you not get an 81dl chain on with the large sprocket? It seems that the tail of the bar is too short top to bottom and is causing...
-
EIt is clear there is an issue with the chain but I am a bit puzzled at some of the comments regarding the box and if it is "knock off"...
-
EEFSM replied to the thread Anyone from Oregon®️ reading?.Just to be clear, I know those generic boxes come with the 100' rolls and use them routinely when spinning loops for customers, but we...
-
EIt seems that fellow is kind of rough on saws. Some folks can break anything.
-
EEFSM replied to the thread STIHL The Official Stihl Chainsaws Thread.I think this is the first time I ever saw 2 broken clutch shoe retainers (311 model). The clutch drum had come partway off or loose, not...
-
-
EEFSM replied to the thread STIHL The Official Stihl Chainsaws Thread.I worked on a Stihl trimmer (fs45 or similar) that had done the same thing of bending the rod, although I don’t think that had any...
-
EI do understand how the ez start is supposed to be operated, and I have explained and demonstrated it to the owner as well. The saw...
-
EIf you can find a Nason dealer they can mix it for you. It’s a perfect match. It is glossy and not satin.
-
EEFSM replied to the thread Broken piston crown (Echo CS-7310p).Same customer, different saw (620 instead of 7310). This is the 3rd time this saw has had this exact failure, which I blame on...
-
-
EEFSM replied to the thread What is it?.Were there swing sets in the 1700’s?
-
EI measured the rim tonight at each of the seven points where it steps in. All checked the same.
-
EEFSM replied to the thread Stihl Pullin'.The 311 I was working on tonight fired in 2 pulls. Yeah, the 026 style choke is a joke.
-
EJust finished rebuilding a 500i given to me. Replaced seals,bearings,piston and rings,primer bulb. Cylinder was good with a little...
-
EI've seen it with no-name rims. Calipers confirmed out of round between inner spline and outer rim. SMH
-
EEFSM replied to the thread Stihl Pullin'.I suspect he’s got saws with Zama carbs. Their black plastic type pump diaphragms swell badly in the pump chamber area and get to the...
