EFSM's latest activity
-
EEFSM replied to the thread How do yall sharpen your mower blades?.The only thing I buy from Magnamatic is their blade balancer, which is excellent. I spent many hours sharpening on an old Magnamatic...
-
-
EKeywords... when the grass is dry. So far that is yet to happen this year in Iowa.
-
EMost commercial guys seem to like the standard medium lift non mulching blades. Of course they properties more often than most home...
-
EEFSM replied to the thread Husqvarna 562 MK2 beginner porting.Crank stuffers fit over the counterweights and fill the rest of the rotational space that the counterweights take up. Blowdown doesn’t...
-
EEFSM replied to the thread So what did you do today?.That sounds really enjoyable. Surely not wisdom teeth? I’m doing a trial run of boiling and skinning some cypress knees in preparation...
-
-
EEFSM replied to the thread Digging up and moving a large citrus tree?.It may be easier to move the house :hsughwiggle: :tonguecrazy:
-
EIn this frigid sht hole, cardboard is not enough to keep the cold out of the engine bay. Back in 2017 when I was still kinda green to...
-
EThe winter part is not available until May... Only the Southern Hemisphere folks will appreciate that irony.
-
EEFSM replied to the thread Stihl FS240 brushcutter tuning....Most newer equipment is just fine on 32:1, but I wouldn’t run that in a brush cutter with a blade, because the engine hardly runs hot...
-
EEFSM replied to the thread Husqvarna 562 MK2 beginner porting.You can raise the transfers if you pull off the transfer caps. That will increase your torque band.
-
EEFSM replied to the thread Stihl FS240 brushcutter tuning....Does it have a blade on currently?
-
EEFSM replied to the thread Husqvarna 562 MK2 beginner porting.Don’t widen transfers much at all, as that reduces their ability to direct the airflow properly. Widening the exhaust definitely can...
-
EAssuming your using a file that's just from not keeping it at the same angle every stroke.
-
EEFSM replied to the thread Flap Wheels for Mower Blade Sharpening.This is my preferred tool for sharpening blades… We got one about 10 yr ago, and it has paid itself off many times over.
-
