EFSM's latest activity
-
EI've had them for quite some time and I can't remember exactly where, other than off the Internet.
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.Where do you get your micro drill bits?
-
EDrilled a hole slightly larger than the fine wire to use for a safety on the right AV.
-
EI used a star ball driver from Echo on the attachment screws. Which is about as much as can be said for Echoes and 90cc class saws in...
-
EOk here’s the long explanation: I could not recommend any epoxy, as plastic fuel tanks and cans are a type of plastic that is...
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.Of all the brands we are dealer for, Echo is by far the best at parts availability, and there isn’t even a remotely close second, except...
-
EI'll be working on it tonight and will take a pic so you can see.
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.I’m baffled. So it doesn’t come loose from the metal? Or are you saying it is molded together on the back side of the metal between the...
-
ERed Kote specifically says not for plastic tanks. I use some UHMW PE plugs on tanks from time to time and the Red Kote peals off of...
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.Is it glued?
-
EEFSM replied to the thread HUSQVARNA HUSQVARNA THREAD.Is anything different besides the recoil handle, chain, and decals?
-
EIf you hit the dirt often, skip makes sense. If you’re cutting clean wood and don’t need skip for clearance or to keep RPMs up, you’re...
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.Doesn’t the rubber come off the metal plate on the cylinder side?
-
EEFSM replied to the thread STIHL The Official Stihl Chainsaws Thread.You’re saying the tang is coming out of the groove?
-
EEFSM replied to the thread STIHL trimmer burps fuel out tank vent hose.That vent simply lets air in but not out. It should hold vacuum applied to the fitting but not pressure. Do you have a pressure/vacuum...
