EFSM's latest activity
-
EI'll be working on it tonight and will take a pic so you can see.
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.I’m baffled. So it doesn’t come loose from the metal? Or are you saying it is molded together on the back side of the metal between the...
-
ERed Kote specifically says not for plastic tanks. I use some UHMW PE plugs on tanks from time to time and the Red Kote peals off of...
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.Is it glued?
-
EEFSM replied to the thread HUSQVARNA HUSQVARNA THREAD.Is anything different besides the recoil handle, chain, and decals?
-
EIf you hit the dirt often, skip makes sense. If you’re cutting clean wood and don’t need skip for clearance or to keep RPMs up, you’re...
-
EEFSM replied to the thread Husqvarna 592xp woes and fixes.Doesn’t the rubber come off the metal plate on the cylinder side?
-
EEFSM replied to the thread STIHL The Official Stihl Chainsaws Thread.You’re saying the tang is coming out of the groove?
-
EEFSM replied to the thread STIHL trimmer burps fuel out tank vent hose.That vent simply lets air in but not out. It should hold vacuum applied to the fitting but not pressure. Do you have a pressure/vacuum...
-
EEFSM replied to the thread Echo 2511T fuel tank repair.I don’t think so. There are better ways to fix plastic tanks.
-
EWhat about the newer part number which supersedes the 901 part? I think they have it in stock here...
-
EEFSM replied to the thread HELP! makita DCS460 dies when choke is opened.I suppose this is with it removed and one end plugged?
-
EEFSM replied to the thread STIHL The Official Stihl Chainsaws Thread.There are 3 different size cylinders they used. The 028 used 42 and 44mm, the 028 super had a 46mm with a little dome in the middle of...
-
EEFSM replied to the thread STIHL The Official Stihl Chainsaws Thread.150-160 is what I would expect for a 290/390, but it’s very rare that I check the compression on an engine that wasn’t shot or modified...
-
-
EWhat do you call a paper airplane that nobody has been able to fly? ans. From day one, it's always been stationary. ;)
