High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

EFSM's latest activity

  • E
    EFSM reacted to TheDarkLordChinChin's post in the thread Trees Other People Have cut with Like Like.
    Found this yesterday. Western red cedar. No doubt the landowner did it himself. Maybe it was windblow and the sprung back up once...
  • E
    EFSM reacted to TheDarkLordChinChin's post in the thread Trees Other People Have cut with Wow Wow.
    Just seen this on Facebook.
  • E
    EFSM replied to the thread Chemically Wet.
    Illinois uses calcium pretty extensively. Sometimes they are out spreading a brine in March when it’s forecast to get down to 40* (I...
  • E
    EFSM reacted to Al Smith's post in the thread Battery Chargers with Like Like.
    Claims of enhanced capabilies of just about anything under the sun is an old marketing ploy that for the most part works .My favoite...
  • E
    EFSM reacted to Al Smith's post in the thread Battery Chargers with Like Like.
    Regarding voltages on a DC series wound starter motor it goes like this . If you connect 12 volts to a 6 volt motor it multiplies the...
  • E
    EFSM replied to the thread ECHO CS2511T Mods.
    I think most builders on here modify the original muffler.
  • E
    EFSM replied to the thread Chemically Wet.
    Sheep snot FTW!
  • E
    EFSM reacted to Sloughfoot's post in the thread Chemically Wet with Like Like.
    For about 6 years I lived in a place that salted roads before every snow forecast( 5 or 10 times a winter). Got through it with zero...
  • E
    EFSM reacted to Wilhelm's post in the thread Chemically Wet with Like Like.
    Ash is Your friend for iced up driveways. It is grainy/grippy, and it is acidic promoting ice melting. It also attracts sunlight which...
  • E
    EFSM replied to the thread Stihl 361 Leaky Carb.
    Walbro uses a chrome plated needle seat that is quite durable, but I have see them wear through to a yellow metal after a lot of hours...
  • E
    EFSM reacted to Stump Shot's post in the thread Stihl 361 Leaky Carb with Like Like.
    Test to 7 PSI or .5 BAR for a minute and it should either hold or if it leaks down ever so slightly in two minutes is a pass. Otherwise...
  • E
    EFSM replied to the thread Small saw timing advance.
    This is accurate. That is why flywheel nut torque is so critical. Too loose, and it shears the key; too tight, and the extreme taper...
  • E
    EFSM reacted to Sloughfoot's post in the thread Small saw timing advance with Like Like.
    I can see that if the flywheel is wallowed out and loose. The pros that know say a good flywheel doesn't need the woodruff key to stay...
  • E
    EFSM reacted to Mike W's post in the thread Stumped on Stihl BR450 Blower Stopping with Like Like.
    I installed new bearings and seals on Thursday, let the Dirko cure for a couple of days, and put the blower back together today and ran...
  • E
    EFSM replied to the thread First time modifying a cylinder.
    I would compare it to an original and see what the timing should be. If there is a little plating lip, then that could be removed. but...
Show older items
Top