High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

EFSM's latest activity

  • E
    EFSM replied to the thread Oil questions....
    I’m convinced that over 95% of name brand plugs that are replaced aren’t bad. But it is such an easy fix for the few times that they are...
  • E
    EFSM replied to the thread Unknown cylinder.
    It has only exhaust and transfer ports. It is for a reed valves engine.
  • E
    EFSM replied to the thread Trimmer Running Rough.
    I would not buy an aftermarket coil, which is what you’re getting for $20. The coils on these have a lifetime warranty if it is indeed...
  • E
    EFSM replied to the thread Trimmer Running Rough.
    There is also a screw in the middle of the carb rotor for the idle mix. A light bulb spark tester is well worth the few dollars in...
  • E
    EFSM replied to the thread Your pick of light weight bars for Husky?.
    That’s a really good price. That 24” is marked up only $10 from my standard dealer cost.
  • E
    EFSM replied to the thread Trimmer Running Rough.
    What age trimmer is it? Echo had trouble with some older coils failing internally which I suppose could be triggered by a hard fall.
  • E
    EFSM reacted to Wolverine's post in the thread Firewood thread!!! Let's see what you got!!!! with Like Like.
    Nope. Just add it to the stacks. I have a bunch set aside for my smoking needs though. Some mulberry too.
  • E
    EFSM reacted to old guy's post in the thread Need some port numbers with Like Like.
    Hey, go for it, I need as much learnin as anybody!
  • E
    EFSM reacted to huskihl's post in the thread Need some port numbers with Like Like.
    Mostly what he’s getting at is many people saying that it’s a cause of an air leak and that it will suck air in and can potentially...
  • E
    EFSM replied to the thread Firewood thread!!! Let's see what you got!!!!.
    You gonna sell that for smoker wood?
  • E
    EFSM replied to the thread Need some port numbers.
    I hope the OP doesn’t mind the massive tangent.
  • E
    EFSM replied to the thread Need some port numbers.
    I should have specified that if they leak, it’s leaking out compression, not sucking in maverick air. Pushing it in it lowers the engine...
  • E
    EFSM reacted to Shane¹'s post in the thread The 2025 346xp Porting Thread with Like Like.
    Warhawk cylinder going to try porting it squish .021 no gasket. Doesn't look terrible machine it up and see what it looks like hopefully...
  • E
    EFSM replied to the thread Need some port numbers.
    They start to leak enough to matter when the detention spring breaks and they get floppy. I’ve never seen an intact one leak, and I’ve...
  • E
    EFSM reacted to P100Super's post in the thread Partner Chain Saw Thread with Like Like.
    Here are picture of a Partner P100 SUPER 100cc/6 Cubic inch. This must be the last version from Partner. Maybe made around 1981-82. It's...
Show older items
Top