High Quality Chainsaw Bars Husqvarna Toys Hockfire Saws

EFSM's latest activity

  • E
    EFSM replied to the thread John Deere D110 Not Starting.
    No it won’t. But it should crank over with voltage fed straight to the starter. Make sure the engine turns over easily by hand by...
  • E
    EFSM replied to the thread lx178.
    That’s older than any FD I’ve ever worked on. What a weird setup! I would suspect supply voltage to the igniter. I’m sure it has a 12v...
  • E
    I think the tigger has an adjustment screw in it on that model. Backing that out a couple turns means the throttle cable won’t pull as...
  • E
    EFSM reacted to Philbert's post in the thread Tell me a joke..... with Like Like.
    Philbert
  • E
    EFSM replied to the thread lx178.
    Could you post a picture of the igniter? Most of the FD engines have a 12v supplied ignition without an igniter. FC series is the only...
  • E
    EFSM replied to the thread Can't Find High Speed Adjustment.
    If there is a high adjustment, it is under a small plastic plug in the side of the carburetor body. The low adjustment is in the middle...
  • E
    The ramped intake side transfers on those cylinders are weird. Some people square them up and turn the roof into a normal flat profile...
  • E
    EFSM replied to the thread Stihl Backpack blowers.
    You’re in the minority. Not a lot of love for Ultra around.
  • E
    EFSM replied to the thread lx178.
    Is this a single cylinder engine and what model engine?
  • E
    EFSM reacted to GMB74's post in the thread John Deere D110 belt tensioner issue with Like Like.
    It's been awhile since I worked at a JD dealership, but here goes: The bracket on the mower deck that anchors the end of the control...
  • E
    EFSM reacted to tallgrass_coyote's post in the thread What Stihl trimmer should I get? with Like Like.
    People planted a lot as ornamentals back in the day yoo. Birds spread it like crazy.
  • E
    EFSM replied to the thread Connection/running Issues 560xp.
    I had a 550 with a bad coil that acted like this. Put a fresh plug in it and it would start once and run okay but then flood the next...
  • E
    EFSM replied to the thread Connection/running Issues 560xp.
    We’ve sold tens of thousands with absolutely zero issues. But those are definitely genuine, purchased through a distributor.
  • E
    EFSM replied to the thread Stihl Backpack blowers.
    They are excessive for small jobs. I wonder how soon it will be until we see twin pipe blowers. Echo toyed around with that many years...
  • E
    EFSM replied to the thread Duke's saw chain.
    What you’re describing sounds like a pitch mismatch. If the chain is made with too much/little distance between the rivets, the bottom...
Top