EFSM's latest activity
-
EEFSM replied to the thread FH580v ES20 not charging battery.The battery should ideally be charging at least 13.5 volts at WOT. If not, check voltage at the red or purple wire at the regulator...
-
E@EFSM - I simply made some additional adjustments to the L adjustment and it seemed to work O.K. I also showed the owner how to use the...
-
EEFSM replied to the thread HUSQVARNA HUSQVARNA THREAD.Did you ever get this saw sorted out? IIRC those carburetors have an accelerator plunger. When the oring is bad on it weird things happen.
-
EEFSM replied to the thread HELP! How to know when you have too much hook.It all depends on what you’re looking for. The sharper the hook the faster it should cut but it will have a more fragile cutting edge.
-
EEFSM replied to the thread HELP! How to know when you have too much hook.I’d say that looks pretty good. If anything it’s on the aggressive side.
-
EEFSM replied to the thread WANTED Shindaiwa 70029-82230 AIR FILTER.Find a larger foam air filter (maybe for a generator) and cut it to fit.
-
EEFSM replied to the thread Trimmer Lines Breaking Off Inside Speed Feed.I'm not sure if the OP is still watching this, but I'd like to chime in. MAKE SURE THE INNER SPOOL ISN'T IN BACKWARDS!!! We've sold...
-
EEFSM replied to the thread Ye olde Snapper Backpack.We have a big box of Nikki kits from the 90's and before. If you could send me a pic and #s off the carburetor it would help. I'd say...
-
EEFSM replied to the thread Cordless impact.We use M12 Milwaukee tools in our shop. We don't require huge battery life, and the compact nature of the M12 is awesome. But there are...
-
EEFSM replied to the thread HELP! CS-590 base gasket delete.The squish is massive on that model. Even without a base gasket it's probably at least .030".
-
EEFSM replied to the thread What? No bandsaw milling threads?.Welcome! I’m probably not too far away from you. Where are you in relation to Jackson?
-
EHey folks! New to the forum. I do some band milling when I have time. I’m located in Southeast Missouri.
-
EEFSM replied to the thread Kawasaki engines...are they really that good...not seeing it.Then something is wrong. What fuel filters are you using and is this an FH or FS series engine?
-
EEFSM replied to the thread Kawasaki engines...are they really that good...not seeing it.All new carburetors have rather small jets that can plug easily. As far as idle goes the Kawasaki engines as a whole idle better than...
-
EEFSM replied to the thread Kawasaki engines...are they really that good...not seeing it.We've been selling them like hotcakes. For $600 they're one of the best value out there.
