EFSM's latest activity
-
EEFSM replied to the thread Looking for a CD ignition module for Echo CST-610 EVL.I'm in the market for a pickup coil for a 610 if anyone has one.
-
EEFSM replied to the thread Ignition coil swap.BTW a 620 coil is considered unlimited. The 590's and later 600's have a limited coil in that it drastically reduces the timing past...
-
EEFSM replied to the thread Husqvarna 564xp (g) fuel inject.Yes, and yes. On your second point, a wider bore does obviously give more port area, but width doesn't increase area as fast as height...
-
EThey will do it when they have to. Saws are a small part of their business so it's likely they won't have to for some time given the...
-
EEFSM replied to the thread Husqvarna 564xp (g) fuel inject.Are you talking about the cylinder not being centered on the crank? I know of only one modern 2-stroke engine like that (Echo/Shindaiwa...
-
EEFSM replied to the thread Husqvarna 564xp (g) fuel inject.With older tech 2-strokes, this was largely the case, at least in relation to horsepower output. A longer stroke meant you could get...
-
EAs far as the comments worrying about sawe going 100% electric. The tech just isn't there yet. Same situation in the automotive world.
-
EEFSM replied to the thread Husqvarna 564xp (g) fuel inject.Echo told us 5 years ago that they have the tech on the shelf ready when they need it, but they are extremely gunshy at this point. I...
-
EI don’t have tons of experience with 500i, but I’ve seen a bad injector, 2 bad pistons, a bad stator (probably the wiring), and a bad...
-
EEFSM replied to the thread 261 with a Farm Boss bar?.I would assume the dealer had been switching bars around. It's probably a lighter laminated bar vs possibly a solid bar, but I don't...
-
EFrost went deep this year. Low snow. Ground still frozen with 16-24 inches of soups on top of the frost. Might have a call a plumber...
-
EEFSM replied to the thread 4Mix Question.How many hours or seasons are on it?
-
EEFSM replied to the thread Complain about modern pickup trucks.It may be overhyped, but supposedly the pistons can start turning in the bore, resulting in the rollers no longer being parallel with...
-
E#1 complaint with new pickups: PRICE!!! #2: Screens. #3: Bad visibility over the hood #4: MPG still sucks #5: DIY maintenance...
