edisto's latest activity
-
edisto reacted to jacktheripper's post in the thread SOLD Stihl 075/076/ts760 hardware lot with
Like.
For your new 076? I got my 50” cannon bar (used to belong to your saw) mounted with adapters on my 394xp yesterday. It was in beautiful... -
edisto reacted to Partner's post in the thread How To Remove Aluminum Transfer Without Acid with Like.
The thickest one can be unscrewed into 4 3" discs, and the smaller ones are 2" and covered with epoxy
-
edisto reacted to Chainmale's post in the thread How To Remove Aluminum Transfer Without Acid with Like.
No
-
Thank You very much! :beer-toast1: A fair amount of time, effort & $$$ went into making them. I have made 5 different clutch removal...
-
edisto replied to the thread The Metalworking Thread.A much better result than the sockets that I have hacked up with my angle-grinder!
-
Lol Phil! Thanks fellas!
-
edisto replied to the thread The Metalworking Thread.That is some pretty work!
-
I forgot to take a picture of the milled hex. :confused: Dolmar 420/460/4k/5k/6100 clutch removal tool. Impact drive proof...
-
edisto replied to the thread The Metalworking Thread.I haven't tempered at a fixed temperature, but I have applied heat to draw back a quenched part, which is a form of tempering. Heating...
-
I think you meant to say annealed it. Heat it up, hold it for a bit, and then let cool very slowly to remove and hardening.
-
edisto reacted to Mad Professor's post in the thread Stock and Modded “can” mufflers vs pipes - an honest discussion without any attitude with Like.
This thread has me doing flashbacks to my dirtbike/motocross days as a teenager already.........
-
edisto reacted to huskihl's post in the thread Stock and Modded “can” mufflers vs pipes - an honest discussion without any attitude with Like.
Not the ramp in particular like you mentioned, but I believe in the other thread I commented about bigger holes, easier pathways...
-
edisto reacted to Ketchup's post in the thread Stock and Modded “can” mufflers vs pipes - an honest discussion without any attitude with Like.
Okay, so potentially an expansion chamber could achieve 30ish degrees of supercharge if the blowdown were that long. What effect does...
-
edisto replied to the thread Stock and Modded “can” mufflers vs pipes - an honest discussion without any attitude.The stinger length and diameter are sized to generate pressure in the chamber, which is why a good portion of the length can be inside...
-
edisto reacted to heimannm's post in the thread Stock and Modded “can” mufflers vs pipes - an honest discussion without any attitude with Like.