Duane(Pa)'s latest activity
-
I did a few resets when I first learned it could be done. Haven’t done one in years. Seems like the saws don’t GAF how much I fondle... -
my thought also,, i have changed the solenoid on the one and no change,,
-
-
For what it’s worth, I always replace the fuel solenoid and filter first on one with running problems. Had a 201t that was idling high...
-
Duane(Pa) replied to the thread M Tronic Reset.So neither one will run with the lever down?
-
i have a few of these left for sale. don't think i'll be making any more of them. pm me if interested
-
Duane(Pa) replied to the thread M Tronic Reset.I'm not sure they fast idle in start position? in fact, pretty sure non of mine do...
-
got 2 661 stihls. Both i have no history on but. neither will got into reset either method,, no label on saw foot. Saw will not go to...
-
It's going to tune itself to where it wants to be no matter the starting point. In other words, it doesn't matter if it starts from...
-
Duane(Pa) replied to the thread M Tronic Reset.Awesome information!
-
Duane(Pa) replied to the thread M Tronic Reset.I'm guessing it should be at operating temperature prior to any long duration throttle pinning? So, if a reset isn't performed, will the...
-
I was, too. It was many years ago though. My grandson works at an Ace Hardware, they want to send him to Va. Beach to school. I would...
-
Also, if saw is 2.0 it usually wont have any markings from memory, but on the emmissions lable there will be an M3.0 if its 3.0, see on...
-
If mtronic 2.0 its leave in choke for 90 sec and shut down, if 3.0 its choke for 30 sec then pin full throttle, it will rev limit at 3/4...
-
https://blog.stihl.co.uk/perform-m-tronic-reset/
