Duane(Pa)'s latest activity
-
If you take the clutch off there is just one bolt holding the whole pump in -
Duane(Pa) reacted to Mastermind's post in the thread UPCOMING MMWS Fall GTG October 24th and 25th with
Love.
It is purty huh? -
Duane(Pa) replied to the thread UPCOMING MMWS Fall GTG October 24th and 25th.Knot Chet. Stihl admiring it ;)
-
Duane(Pa) replied to the thread UPCOMING MMWS Fall GTG October 24th and 25th.Crossville, near the interstate is popular. Maybe 20 minutes, half hour away?
-
Just opening the factory hole on a 362 can.
-
Duane(Pa) replied to the thread .325 chain, LGX, LPX or X-CUT?.I don’t know how to quantify it, but it is noticeably faster…The easiest way to identify pro is the shape of the raker.
-
-
Duane(Pa) replied to the thread .325 chain, LGX, LPX or X-CUT?.It really is the sht! Keep it out of the dirt and you will be surprised how durable it is.
-
Holy sht does that 23rs pro cut GOOD! Saw is a cs 520. Tunes up burblin rich at 14,200 rpm no-load and burble cleans up in the cut...
-
Thanks for the prayers everyone God watched over me and I finally came home yesterday still on the recovering side of things but I'm...
-
only stihl I've ever owned before this was a 311, I used it for not even 1 tank and sold it to the guy who works at the gas station on...
-
Duane(Pa) reacted to Freak007's post in the thread WANTED 325 NK bar for 12mm Stihl (Tsumura, GB, Sugi, etc) with
Like.
Hoping one of our fine members can help me out here. Looking for a 18" .325 x .050 NK bar for 3003/D025 Stihl. New, or good used... GB... -
Duane(Pa) replied to the thread HELP! Stihl 18" .325 x 50.FWIW, I have been using Stihl 23 RS Pro (supposedly NK?) on "regular" bars with no ill effects. I don't have any nub chains, so I'm not...
-
I'll take the MS462 3/4 wrap(woods ported) if still available. Randy has been great to deal with
-
Duane(Pa) reacted to huskihl's post in the thread Clutch covers too narrow for good chip clearance with Like.
I saw “woodshop” in your name and figured that’s what you’re doing. If I were making 4 foot long boards, that’s the way I would cut it...
-
Duane(Pa) reacted to mac's woodshop's post in the thread Clutch covers too narrow for good chip clearance with Like.
Thanks for much information to all the posts. Some things I did not know for sure. Appreciate you all !!! I have a 48 inch bar on the...
