Duane(Pa)'s latest activity
-
Update: found a saw -
I used to have a 4910 that Joe did....it was very strong and I regret selling it.
-
Duane(Pa) reacted to mrxlh's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with
Like.
The shelf standard offering CBN might not be your best option, Baltic abrasives will make any wheel profile/material/grit you specify... -
Duane(Pa) replied to the thread FOUND IT Ported Echo CS 501p.Red97 is AKA Dyno Joe. I have a 4910 he ported and it is a really stout rig...
-
I’ve hoped that the AM would step up with more support for this chassis. At least @Duke Thieroff has good AM p/c kits for them.
-
Duane(Pa) replied to the thread The 2025 346xp Porting Thread.I’m kinda bummed that parts seem to be slowly discontinued. No new top covers or tanks for instance…
-
Duane(Pa) replied to the thread Bar rail groove closers.Interesting. Might be an option if I could find a shop to do it. Seems silly to buy a closing tool for a few bars…
-
The Bar Shop is the best at closing rails.
-
Duane(Pa) replied to the thread Chainsaw grinder questions, tips, tricks, and pics!!!!.I’m pretty sure those would be 1/4 and 3/8 LP? Might work for 3/8, but not ideal…
-
Duane(Pa) reacted to lehman live edge slab's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
So far I’ve had good luck with my cbn wheel I bought from diamond wheel out of southern Minnesota. Probably have sharpened 5-600 chains...
-
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
I'm just a firewood hack, I cut about 15 cords a year, I only own a total of about 15 chains for use between my 4 saws. I tuned in all...
-
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
I'm content with these chips, .325 husky safety chain on a 550XP in a green doug fir that blew over a few days ago.
-
Duane(Pa) reacted to redneckhillbilly's post in the thread Chainsaw grinder questions, tips, tricks, and pics!!!! with Like.
ive been cleaning the wheel in between chains, it was just one of those thoughts that roll through your brain as your doing something.
-
Got these from Stihl many years ago. They work well if you close the rails to tight. The one on top is part #1106 893 9200 | Groove...
-
They do work. Get some decent aftermarket bearings, they tend to have less radial run out than the stock thus giving a better feel...