Dream's latest activity
-
I could manage the round to square for a few links, but I am not planning to make the effort on the new logo chain, I will see if I can... -
If you still had a piece like the one in the photo, you can grind it square - this way from Super Pro Round (SPR) you get Super Pro...
-
Bling - Thanks to AWise_mac_nut for bringing this to my attention. I had a piece of .404 chisel with the McCulloch "Mountain" logo on...
-
Unless I'm mistaken that saw to the left looks some what like a 6-10 except from my view point it's left hand start .Unless the parts...
-
Those are good looking saws!!
-
The 6-10 has low compression, the 55 loads up and floods and the 797 leaks at the block to gas tank. Getting busy and will have to put...
-
Cheers Max. I cleaned pump gasket which looks in good shape and put a tiny smear of grease on the circle rib on gasket, reassembled...
-
Got one plus the socket ,E-bay a long time ago from a person in I think Las Vegas who must have cornered the market with NOS when...
-
McCulloch 85583 "L" shaped spline wrench...
-
To revisit the timing of a reed valve Mac engine if I'm not mistaken the term "marvericking the points" was discovered by an early kart...
-
Dream reacted to Max the Mac Man's post in the thread MCCULLOCH The official McCulloch thread with
Like.
I have had the spring plates remanufactured. I have the eyelets also. If you need them just shoot me a message. -
With the 82's they have plenty of torque but I've found if you just hook the dog and drop the reins and let it pick out where it wants...
-
Dream reacted to Kiwioilboiler's post in the thread Not so pros 4 new and without politics with Like.
You're in good company. Both John the Carpenter and Adam the Lumber Waster have Hitachi...
-
Good points Steve, I was thinking 10l at first, but, for crank, cylinder, piston, carburetors, 4.5l will work great. 300x155x100mm. I...
-
I ordered one of these https://www.amazon.com/Metabo-HPT-C10FCGS-Compound-15-Amp/dp/B07PX44JQM