Dream's latest activity
-
As a suggestion you might try MFG supply that on occasion has those domed air filters .Matter of fact one is shown on the site but I... -
If you have a photo of the saw look carefully at the AF cover, the one on the left (MAC10-10 & 10-10A or 10-10 Automatic) uses the more...
-
If you look through the 10-10 IPLs you may be able to narrow down the change over. I tried to fit a low filter on my saw and I don't...
-
Close to pulling the trigger on a 10-10. Is there any way to know if one of these takes the hens teeth domed filter or the "low filter"...
-
I'll shot you a p.m ... Ernie
-
McCulloch PN is 87674. I have a few NOS as well as some 3D printed ones that I make (and sell) as well. The 3D printed ones are not...
-
You wouldn't happen to have a part number would you ? Thanks Ernie
-
Yep. You can find them sometimes on Ebay and per @hacskaroly Dukes sells new AM ones. Good get. Hope to add one soon, myself.
-
Picked up a 10-10 and I have a question... Should this have a screen on inside of the recoil cover to keep anything from coming in...
-
I'd always assumed 2 stroke mix had been around as long as the 2 stroke engine. Here's a good discussion on the origins of 2 stroke oil...
-
Question on the amount of gas this carburetor is transferring, seems excessive. Quickly floods itself out. When pulled over slow there...
-
That was the best option in the late 1950's. For that reason, the owners manual included instructions on cleaning the exhaust ports and...
-
"mix 8 oz 30 weight engine oil with a gallon of gas". Am I reading that right?
-
Good old 16 to 1 oil ratio same as old Evenrude boat motors .Duel usage,lube things up and fog for mosquitoes at the same time . :thumbup:
-
In addition to several repairs in the waiting, a friend dropped off this 12-25 McCulloch two man saw this week. This one should be...
