David Young's latest activity
-
David Young reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with
Like.
Tore it apart tonight. Found that the case bolts were slightly loose which probably contributed to the oil leak. Here's the rough... -
David Young reacted to Outback's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
This is going back to the beginning, but I was curious why you picked a 661 piston for your p1 saw. Was that what you gleaned from the...
-
David Young reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
my harbor freight caliper rough measurements are: roughly 20mm in height the top shaft portion where the oil pump gear rides: 19.31mm...
-
David Young reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
I was able to get some stuff sort of tuned on the 2nd prototype and get some video. As I'm learning how to do video editing I got pulled...
-
David Young reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
Yup 💯 I did clearance the top cover in this area, but as you note the higher jug means that the wiring gets pulled and could be pinched...
-
David Young reacted to upstateamish's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
you're correct I modified the corner so theres no wire rub Muffler bolts up without issue (I'll be adding the addtional opening on...
-
David Young reacted to Ketchup's post in the thread Hybrid clonesaw 365 with a 390 topend - aka the "86'r from youtube" with Like.
Here’s your solution: I made a crude first attempt myself. You’ll need good carbide.
-
Any farmer knows the real "farm boss" is the wife, mother or other female.
-
David Young replied to the thread Scratching my head....Tom do you have another compatible saw that runs and you can swap parts between?
-
Good answer. D - Young.
-
David Young replied to the thread Scratching my head....if a coil is weak it can fire in open air but not fire off a compressed air gas mix. Your lead to from coil to plug could have an issue...
-
I guess your thpeech is methed up too.
-
David Young replied to the thread 261 with a Farm Boss bar?.Not this thyme. I missed the first too honks. Is this 311y I’d demand a 50% refund. Or that they swap the saw out for a legitimate...
-
I usually tell them to hurry up because I have my mother in the truck and no time to fukk around.
-
Ya and take a sh!t on the floor while he's there.
