dangerousatom's latest activity
-
dangerousatom replied to the thread Fuel color before mixing.Theres kind of a catch with that question: Id speculate on average 175-200* F Gas is a swill of way too many chemicals/petroleum... -
dangerousatom replied to the thread what IGNITION SYSTEM would be the better combo for a 550xp MK1 or 2 build.Ah, the Rev-Boost is probably what I was thinking of. Sounds like I need to build both :rolleyes: . .
-
dangerousatom replied to the thread Muffler Mods and Increased Decibels???.Chainsawing while in a kayak! That some sketchy stuff, like cutting at night with no lights all while a bit tippsy. . .
-
dangerousatom replied to the thread Laser Cylinder Kits.Looks like a rebranded Hyway kit. Probably from the same factory as Hyway. It could even be a guy who has his own packaging and is...
-
dangerousatom replied to the thread Muffler Mods and Increased Decibels???.Wondering 🤔 if welding a 90 inside the muffler box but shooting it straight out would cover all the bases. . .
-
dangerousatom replied to the thread what IGNITION SYSTEM would be the better combo for a 550xp MK1 or 2 build.Yes those are the main reasons Im after a highbred build if possible. From the few autotune porting's Ive done it seems the RPM always...
-
dangerousatom replied to the thread what IGNITION SYSTEM would be the better combo for a 550xp MK1 or 2 build.LoL Well see what comes of it, depending on the pending recommendations. :icon_popcorn: I have a feeling the swap is not worth the...
-
dangerousatom replied to the thread Fuel color before mixing.I think the yellow is detergent additives and stabilizers, they will put in dye to emphasize this as well . Straight distilled gasoline...
-
dangerousatom posted the thread what IGNITION SYSTEM would be the better combo for a 550xp MK1 or 2 build in Chainsaws.Looking for some quick advice on a 550xp build, particularly the coil difference. I do not have a lathe so I am not looking to do any...
-
dangerousatom replied to the thread Muffler Mods and Increased Decibels???.All the Honda Boys from the 90s have grown up into saw guys . .
-
dangerousatom replied to the thread HL Supply MS360 Warhawk cylinder kit test.👍🏻 Was looking for experiences with them more the availability.
-
dangerousatom replied to the thread HL Supply MS360 Warhawk cylinder kit test.I know it’s an old thread…. Any more word on theses cylinders? I’m looking to buy one for a 555 build on the cheap . .
-
dangerousatom replied to the thread Looking for ideas on broken stud removal.Another variation on the Heat-N-Drill technique. Find your smallest drill bit 1/16th or under and start the drill on the edge of the...
-
dangerousatom replied to the thread Cannon bar tip failure.Id call Cannon also; If I were a manufacture Id prefer a review were its stated "they stood behind their product & made it right" even...
-
dangerousatom replied to the thread FOUND IT CLOSED.CLOSED thanks to eBay.