dangerousatom's latest activity
-
dangerousatom replied to the thread Craftsman Warranty.Craftsman and a large amount of "Made in USA" tools are actually made over seas. The way it works is quite deceptive. According to FTC... -
dangerousatom replied to the thread Thick and durable handle wrap?.Find a length of 1-1/4" underground heat shrink tube. Underground is thicker and hot glue on the inside. If you want a lil "cush"...
-
dangerousatom replied to the thread So what did you buy today.Bought my 3rd pop-up piston from LiL Red Barn for the 550xp i got off eBay for dirt cheep. It supposedly didn't run but does without...
-
dangerousatom replied to the thread Porting help don’t need/want #’s.The above advice is all spot on. Like drf256 mentioned wax the burr while using it will help keep chips from forming on the back sides...
-
dangerousatom replied to the thread HELP! 372 xtorq issues.mmmm? Crazy! Get rid of it and never think of it again. It’s probably something stupid that nobody will ever think of or should even...
-
dangerousatom replied to the thread HELP! 372 xtorq issues.-If you have another of the same saw start swapping parts one at a time, carb, coil, flywheel, ect until you find the culprit. -Could...
-
dangerousatom replied to the thread Husqvarna 572xp in 2026.I must agree with everyone so far the 572 & 565 are both great saws. They run extremely well stock & with a heavy muffler porting and...
-
dangerousatom replied to the thread Chain changing tension as it rotates.^^^ I’d have to agree if it’s not the chain it’s the gear on the bar tip. Clamp the bar in a vice with a square along side and leave a...
-
dangerousatom replied to the thread Chain changing tension as it rotates.. Ya I asked that few days ago….?!?
-
dangerousatom replied to the thread Chain changing tension as it rotates.LoL maybe 🤔 I’m not laughing at ur comment but how we are all spit-balling this. Have you swapped out the chain yet? That’s were I’d...
-
dangerousatom replied to the thread Chain changing tension as it rotates.My money is on a tight bunch of rivets or sloppy holes on the chain. A bearing, rim sprocket or nose sprocket will not give that much...
-
dangerousatom replied to the thread Husqvarna 550 xpg hood latch.Sell them on amazon for 5 for $8.50ish They may not be OEM but they are cheap and you can store one of 2 inside the saw cover back by...
-
dangerousatom replied to the thread Husqvarna 562 MK2 beginner porting.Not too terrible for 1st time.... Pull the transfer covers off, there's a few ruff bits in there and it lets you get to the lower...
-
dangerousatom replied to the thread Echo 2511T fuel tank repair.Ok here’s the long explanation: I could not recommend any epoxy, as plastic fuel tanks and cans are a type of plastic that is...
-
dangerousatom replied to the thread Echo 2511T fuel tank repair.Don’t know. If you have some sitting around test it out on the outside, really nothing to loose?!?