dangerousatom's latest activity
-
dangerousatom replied to the thread Oil questions....Now you have me thinking. Im wondering it if it will build up in the carb screen and diaphragm.....:rolleyes: I need to tear a fine... -
dangerousatom replied to the thread Oil questions....Ya Ive read and heard that all over. I did find that it darkened and slowed the fuel through the white filters. I have not seen any...
-
dangerousatom replied to the thread Oil questions....I have found that the same oil mix burns different in different size and air flow layouts of 2cycle motors. This I think for the most...
-
dangerousatom replied to the thread nm.What saw is it? an older saw with no side transfers will leave oil in the CC more then ones with them. . .
-
Naw - those look like pretty average wear marks to me. Most two-cycle pistons will pick up wear lines or marks. Apart from the burnt oil...
-
dangerousatom replied to the thread nm.Id say crappy oil too, or running a very rich mix a few tanks and oil built up in the bottom of the CC. Then the saw was run near...
-
dangerousatom replied to the thread Hand processing.Lol you have no idea how many people think my name is "Tom" cuz of my inter-webs handle ...... dangerousadam was surprisingly taken...
-
dangerousatom replied to the thread Hand processing.I split it where its laying after bucking a log if all logs are in the same location. Pitching a log into a tire or wrapping with some...
-
dangerousatom replied to the thread Firewood saw.The 550 & 562xp’s do most of the fire wood bucking, unless it’s a monster log. Felling is usually the 565 that’s now quite a zippy...
-
dangerousatom replied to the thread Help Please, 2024 New Cordless Grass Trimmer.I.B.T.L. . . . :rolleyes:
-
dangerousatom replied to the thread Snowblowers and teflon spray.The cheaper the better when it comes to snow blower anti snow clogging spray remedies. The issue is most fly off in a few minutes of...
-
dangerousatom replied to the thread Saw building 101?.https://www.dewalt.com/product/dwht70265/31-pc-ratcheting-t-handle-hex-key-set Like $27 at the Depot then just get yourself a good set...
-
dangerousatom replied to the thread Saw building 101?.All above input is excellent. Id invest in some testing tools: -CC/cylinder/carb pressure testing setup....aka a +/- pressure mighty...
-
dangerousatom replied to the thread Reinstalling clutch.I hand tighten There are a few ways to get things tight, but the saw, in theory will tighten the clutch down as it’s turning in the...
-
dangerousatom replied to the thread The Official Craigslist & eBay Thread.https://www.ebay.com/itm/167964772731?_skw=husqvarna+chainsaw&itmmeta=01KB89YSRP4B7VHA3BDVD6G351&hash=item271b7b097b:g:0fwAAeSw4y5pKhRd&i...
