Creaky limb tree care's latest activity
-
CCreaky limb tree care reacted to Teewhy's post in the thread Connection/running Issues 560xp with
Like.
@SimonHS Thats a great point, pressure test is next on my to do list 👍🏼 @Stump Shot Thanks for taking the time to write all that out... -
CCreaky limb tree care replied to the thread Connection/running Issues 560xp.Have you tried a new plug? Sometimes it is the simple things...
-
CDoes the saw run for a few seconds if you put some mix through the carb bore? Did you reverse the intake block gaskets? The impulse...
-
CCreaky limb tree care reacted to RCBS's post in the thread Recommend me a gasket material with Like.
-
CCreaky limb tree care reacted to David Young's post in the thread Recommend me a gasket material with Like.
Great post, I use similar stuff from Napa. I have used that stuff on mufflers, it will work fine, I have never had an issue. but it...
-
CCreaky limb tree care reacted to CTtreeman's post in the thread 540xp Mark 3 ran for three minutes with Like.
Yeah after all this I am glad they finally did the right thing. But they were just too damn lazy and apparently thought me a fool...
-
CCreaky limb tree care reacted to smokey7's post in the thread 540xp Mark 3 ran for three minutes with Like.
I remember vividly Husqvarna just came out with the 350( earlier version). Got it day one and he commented how hard it was to start and...
-
CCreaky limb tree care reacted to pbillyi69's post in the thread The "I work with dumb people" thread with Like.
people *f-wording retarded
-
CCreaky limb tree care reacted to old saw fixer's post in the thread The "I work with dumb people" thread with Like.
We had a Ukrainian guy at work that would do stuff like grinding plastic and aluminum on the bench grinder. In addition to the fouling...
-
CCreaky limb tree care reacted to Wilhelm's post in the thread The "I work with dumb people" thread with Like.
We grind HSS drill bits on that wheel. Can You imagine the unpleasant feeling when the bits cutter catches onto that laminated plastic...
-
CCreaky limb tree care reacted to stihl #1's post in the thread Ms441c no spark, am I dumb? with Like.
This is from using the MDG1 Diagnostic tester Procedure. If there is a failure to connect then the wiring harness needs to be checked...
-
CI heard threw the grapevine that @sawmikaze uses this stuff by the gallon tew douche after he’s done en de toilette 🤷🏼♂️
-
CCreaky limb tree care reacted to redneckhillbilly's post in the thread Saw Sniffers Annonymous with Like.
need to start selling maxima 927 scented soap, so posers can smell like 2 stroke everyday
-
CCreaky limb tree care replied to the thread Saw Sniffers Annonymous.Not really chainsaw related, but You can't beat the heady smell of Castrol R plus the old recipe Hoppes no9 🥰
-
CI knew a broad like that.