Coupe's latest activity
-
CCoupe replied to the thread Riveted Husqvarna Tag Question.I think with Husqvarna's there is quite a lot of places in the world where they are assembled. Foe instance I had a Husky 36 made in usa...
-
CCoupe replied to the thread Acresinternet.com.Ray if you are using google it is a security thing with acresinternet not keeping some thing in there site up to scratch. Try Microsoft...
-
CCoupe replied to the thread Stihl 261c blowing out spark plugs.Make sure you get the tap square to the hole and not on an angle bring the cylinder bit over half and put the Helicoil in. Put plenty of...
-
CCoupe replied to the thread Acresinternet.com.Use Microsoft Edge that will let you in.
-
CCoupe replied to the thread Echo Carb Limiters Question.If you have trouble with the jets backing off it is because the springs have got weak. Just gently stretch the spring a tad and that...
-
CCoupe replied to the thread HELP! I.D Craftsman saw.I have the same problem with google Ernie but Microsoft Edge will. It is something to do with google chrome security
-
CCoupe replied to the thread SOLD Husqvarna 55.Very nice saw, worth every dollar of that.
-
CCoupe replied to the thread Husqvarna 572xp carb issue.Pull your fuel line out of your tank and plug your vacuum tester straight in the line. Put 5pd or so of pressure and see if it holds if...
-
CCoupe replied to the thread Making my own flywheel pullers for Stihl equipment (and possibly others).I use a car steering wheel puller as most flywheels have threaded holes in them. Had to pull one the other day without any holes so took...
-
CCoupe replied to the thread HELP! Toro 721 R — missing carbeurator part.Carbie drain plug to empty bowl.
-
CCoupe replied to the thread Echo CS 310 Issue.May be a bit lean on the low screw too so turn that one anticlockwise a bit and try that.
-
CStihl took two steps backwards with flippy caps. The best caps are on the old saws that had the metal chains and hook that kept the cap...
-
CThe o-rings are never tight. Look at the outer part of the o-ring where it seals against the taper of the tank. If there is a flat spot...
-
CCoupe replied to the thread SELLING Jred 930 super.That is a very good price and they are a great saw. Also have plenty of grunt. I use mine on a lot of big jobs and has never failed me yet.
-
-
CCoupe replied to the thread Stihl 361 Leaky Carb.Find someone with a pressure tester and put 8 or 10 pds of pressure and if will not hold it would point at the needle and seat. And if...
