Catbuster's latest activity
-
I've only put a couple together and it's been awhile but if if spins easy with 2 fingers I would think it's fine. You might want to wait... -
Catbuster replied to the thread HELP! Stumped on Stihl TS420 rewind starter.These rewinds are one of the worst designed things Stihl has ever come up with. That’s maybe the most important part about fixing...
-
Catbuster reacted to maulhead's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with
Like.
Weird mine will empty the oil tank, before the gas tank runs out. Maybe different flavors of wood, create the variable. 🤷♂️ -
Catbuster reacted to maulhead's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
I'm curious what's the point of putting a 460 HO oiler in 462 is? If you want a 462 to sling more oil, just knock in the pin on the...
-
Catbuster reacted to sawmikaze's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
A 440 doesn't oil as good as a 462 does. A 660 doesn't oil as good as a 661 does. Both by simply pushing in the limiting pin to allow...
-
Catbuster reacted to sawmikaze's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
That's why they continue to make the new models with an oil pump that's adequate for the recommended bar lengths whether it's an R model...
-
Catbuster reacted to sawmikaze's post in the thread Stihl oiler upgrades. Please post compatible saws and oilers. with Like.
You didn't put an oil pump from a 460 in your 462. It isn't possible. There is no "HO" pump for a 462, they made it adequate enough...
-
Catbuster replied to the thread Oilier adjustment for Lite Bars.I fight this all the time with the ES Light, and new ES bars. I can’t even get a piece of 1/16” TIG wire through. I’ve opened all of...
-
The enlarged hole in the bar may just be less susceptible to clogging. The pump is going to put out what it does no matter what. It'll...
-
Catbuster reacted to Squareground3691's post in the thread Oilier adjustment for Lite Bars with Like.
Probably a bar issue. lm running a 32” .404 Oregon RW bar and not a oil issue, Open factory holes up sum , some times that lacquer...
-
Georgia boots did it again: They're running a very generous sale on a $200 pair of loggers. $125, free shipping and a pair ah socks. I...
-
Your hardwood is different than ours
-
Would be way more than that on a good grade log tho!
-
It’s a type of cutting mainly used for high dollar veneer logs. On a $5,000-$10,000 tree you don’t get paid for what direction it falls...
-
Another good way to play in bigger wood Sent from my iPhone using Tapatalk