Catbuster's latest activity
-
Catbuster reacted to ErnieG's post in the thread The forestry and logging pictures thread with
Like.
Being in the construction field and equipment operator i can confirm this function is still in use today...our wheel loaders all have... -
Catbuster reacted to davidwyby's post in the thread The forestry and logging pictures thread with Like.
This is where I've been poking around, going to try to figure out which sites where which by the stumps and gear found. @Catbuster OLD...
-
Catbuster reacted to davidwyby's post in the thread The forestry and logging pictures thread with Like.
Whilst reading about the history of this mountain I came across that the road was cut and log skidded with an allis chalmers skidder...
-
Nice flat top
-
One of many standing dead elms to dump.
-
I use a bore/ plunge cut for forward lean trees or decay at the hinge area. I'd say that one cut for everything is not a good solution...
-
Not my best stump cut ever, but it got down on target. There was a little punk in this one but I knew that from the bore cuts I made to...
-
First big White Oak blew down, second one was in its way and had most of it's limbs stripped off by the blow down. They wanted me to...
-
Catbuster reacted to Evansaw's post in the thread The forestry and logging pictures thread with Like.
Hi all, just here for a quick one We got huge heat for a week, temperatures at 42-43 even 45 degrees celcius. Worked only one day with...
-
Catbuster replied to the thread The forestry and logging pictures thread.A steam donkey. With a few drums. It would be innovative at the time to be rigged between two spars and run something similar to a...
-
Catbuster reacted to davidwyby's post in the thread The forestry and logging pictures thread with Like.
How would a mountain have been logged in the 30s?
-
Catbuster replied to the thread $200 logger boot shootout.I didn’t think California got that humid, maybe I’m wrong? It’s a big state and I haven’t been to all of it. Probably the worst heat...
-
No sir, just leather, with an extra sliver ah leather tacked under the heel. The thin foam footbed was glued in place and it has since...
-
🤣I understand. Its funny but it’sa good thing we all are different. I hate having to clean an air-filter every tank of fuel, stihl have...
-
By the time those 395's are worn out, The Swedes will have designed a 90 cc hybrid gas and solar powered saw that plugs into a solar...