bwalker's latest activity
-
Still running red armor -
bwalker replied to the thread Oil questions....Its very fishy for the reasons I pointed out.
-
bwalker replied to the thread Oil questions....An example of 1 is statistically meaningless. The most important alide is the one showing the valves. Notice that all the air cooled...
-
Check out slide 11 - the results will surprise you. I cannot find the msds sheets for motomix - must be a “secret proprietary...
-
bwalker replied to the thread Oil questions....See the edit to my post. I am certain that the rough finish doesn't hurt a thing and neither does a mirror finish. This is based on the...
-
you are correct that lowering the cylinder changes the timing on all ports. i'll do my best to explain stratto's in a latter video...
-
bwalker replied to the thread Oil questions....Most oils that combust cleanly with sharp tuning dont have much smell. Castor oil has that sweet racy smell because its not completely...
-
no not all modern mix oils are good. especialy, dont use stihl oil!
-
Dominator, Saber, K2, Motul 710, Castrol Go are all very clean burning. I haven’t seen any buildup inside the exhaust port of a saw...
-
bwalker replied to the thread Oil questions....My preference is for a bead blasted intake and a mirror finished exhaust port. I am not suggesting this is the best way. Its just my...
-
bwalker replied to the thread Oil questions....In the first place be aware that the term alkykate is a blanket term for a variety of products. A look at the MSDS I posted shows this...
-
bwalker replied to the thread Oil questions....It is true that the lubricity standard for FB, FC,FD is the same. Its a mistake to also believe that FC and FD oils dont exceed the...
-
bwalker replied to the thread Oil questions....I posted the MSDS....
-
bwalker replied to the thread Oil questions....Just about any aircooled oil is better snd cheaper than Ultra. You want to waste money on low quality, yet high priced crap, have at it.
-
bwalker replied to the thread Oil questions....A properly tuned saw burns oil just fine or you would have a mess in your muffler and even worse internally. A 20 degree swing in...
