Recent content by Burchie70

Randy I finally got the MS441C for $300, here’s a few pictures.

Thanks Randy just looking to clean it up and make a few bucks

What’s a Stihl 441C magnum worth ? A guy has one that’s in good shape, runs good, not a lot use and a fairly new 25” bar and chain. I’ve read quite a few posts about guys who don’t like them and don’t want to buy something that’s going to have issues but he’s only asking $300. Thanks for any advice

I measured it and it’s 1/4”. I’ll take one if you wanna sell one and send it to me?

Thanks, now just to find one. IPL says that part number is no longer available

I posted the picture and it never went through for some reason. This site is pretty glitchy sometimes

So this is the tank vent hole so use 22 ? Thanks for the help guys. I might have one of these check valves from from an old homelite XL2. I think I remember using these when I rebuilt one years ago.

Thanks guys, so there is nothing in the hole that goes in the tank where the vent goes. Which number on the IPL do I need 16 or 22 or both ?

I have an older style 036 and the tank vent leaks like a sieve when you turn it on its side. I had a new one so I threw that on and it still leaks. It’s definitely coming from the vent, I removed the vent and put my finger over the vent hole and turned it upside down and no leaks. Anyone know...

I just messaged back

It’s the one piece 1125 021 1101 . After I posted this I found another oil pump for my saw so I’m going to edit my post. Let me know if you have the cover and clutch or just springs. Thanks for the help

Looking for 036 oil pump, clutch dust cover, and either a clutch or just clutch springs. Thanks

That’s kind of what I was getting at, how we could keep everything straight and easy. Thanks huskihl

So if someone gets in, that’s not on the forum should they give my screen name on PayPal so you have a point of contact ? Just trying to keep it simple for you. Just read your comment above 👍🏻