bulletpruf's latest activity
-
The problem is and can be that carbon on the piston and cumbstion chamber filling up the squish space and you gat different readings... -
bulletpruf replied to the thread $200 Running MS660 - Now What?.You want better pics of my jugs? Are you sure you're not asking the wrong person, on the wrong site??? Sorry, couldn't help myself...
-
bulletpruf replied to the thread $200 Running MS660 - Now What?.Jug cleaned up nicely. Started with muriatic acid, then 400 grit sandpaper by hand, followed by a scotchbrite roll on the drill...
-
-
bulletpruf reacted to lehman live edge slab's post in the thread $200 Running MS660 - Now What? with
Like.
I do a lot of them by hand but that doesn’t mean a grinder with a homemade mandrill and strip of emery wouldn’t be fine. Lots do it that... -
bulletpruf replied to the thread $200 Running MS660 - Now What?.Thanks. Are you doing this by hand on on an angle grinder?
-
bulletpruf reacted to lehman live edge slab's post in the thread $200 Running MS660 - Now What? with Like.
I’ve had good luck with emery cloth and brown scotchbrite if there’s not a lot of transfer otherwise I will use acid on the bad ones.
-
bulletpruf replied to the thread $200 Running MS660 - Now What?.Got it somewhat apart before work this morning. The jug is going to need a bit of work; there are some scratches and/or transfer that...
-
-
bulletpruf replied to the thread World's Dirtiest Chainsaw? Stihl 009.Spent about 10 minutes on it before work this morning; just hit it with some degreaser used a nylon brush to get the big chunks off...
-
-
bulletpruf replied to the thread $200 Running MS660 - Now What?.I plan to use new OEM seals and used OEM trigger parts.
-
I totally understand. I would scrounge eBay for a good lightly used one. BAO or SKF seals. OEM fuel line, filter, impulse line, and...
-
bulletpruf replied to the thread $200 Running MS660 - Now What?.Thanks for the info. That's a screaming deal, of course, but you already know that. I'd like to have an 046 as well, but I have a nice...
-
bulletpruf reacted to lehman live edge slab's post in the thread $200 Running MS660 - Now What? with Like.
I don’t think I’ve ever heard of and 066/660 you couldn’t remove gasket on and still have enough clearance but that doesn’t mean it...
-
bulletpruf replied to the thread $200 Running MS660 - Now What?.OEM intake boots are $50 in eBay. Chinese ones are $15. I don't want to pay $50 and I don't want any Chinese stuff on this saw, so...
-
bulletpruf replied to the thread $200 Running MS660 - Now What?.OEM gasket kit with seals is on the way.
-
bulletpruf replied to the thread So what did you do today?.Borrowed the neighbor's pool skimmer and evicted a hummingbird from the garage again. They hover along the ceiling and somehow can't...
