buckin-wood's latest activity
-
Yes. The order is finally placed. I'll let you guys know when I need some money. -
buckin-wood replied to the thread Tormek Sharpener.sounds like the out of round wobble I had with my Wen. With the Tormek truing jig no pressure is required, just feed the diamond cutter...
-
buckin-wood replied to the thread Tormek Sharpener.I've had a Wen 4270 for over 5 years and its been great. I sharpen knives and scissors, and only occasional use. So I don't know how it...
-
-
buckin-wood replied to the thread 572xp carburetor nozzle.yes sir. popped the end in a bit of fuel line and checked before putting in the carb
-
To test the nozzle, it should hold pressure from the venturi side. Sounds like you might have it though
-
buckin-wood replied to the thread 572xp carburetor nozzle.I had a spare 562 carb on the shelf. Punched the nozzle out of the 572 and 562. Both are 5x7mm. Atomizer looks the same, but the feed...
-
-
buckin-wood replied to the thread 572xp carburetor nozzle.When I first started diagnosing the super rich condition I assumed I was going to find a leak, probably crank seal, and auto tune trying...
-
buckin-wood replied to the thread 572xp carburetor nozzle.found a part number on Zama's website... I don't see it available for purchase anywhere. I reached out to Zama to see if they could...
-
-
The saw was running insanely rich and dying when coming off throttle. I threw a rebuild kit at it but still not holding vacuum and...
-
buckin-wood replied to the thread Group Order For Diamond Burrs.+2 for me if its not too late. thanks!
