bucketofguts's latest activity
-
Bbucketofguts reacted to singinwoodwackr's post in the thread Flippy gas cap leaking....... with
Like.
I got some of those when they came out...like them :D -
Bbucketofguts reacted to singinwoodwackr's post in the thread Flippy gas cap leaking....... with Like.
a slightly undersized diameter ring does work. I use the ones that come in the bulk kit I have :p
-
BProline caps
-
BThe o-rings are never tight. Look at the outer part of the o-ring where it seals against the taper of the tank. If there is a flat spot...
-
Bbucketofguts reacted to singinwoodwackr's post in the thread Flippy gas cap leaking....... with Like.
Most of the time a new o-ring will do the trick. But, not always. Oe caps are only $10
-
BO ring may fix it. I buy the caps by the dozen, lol. They don’t last long with my guys.
-
BI had an oiler cap on a MS 460 and bought a couple of oil rings and a cap 3 yeas and still on the first oil ring. Oiler on a 101 pole...
-
BThis good old soul has passed but I have the picture still.
-
Bbucketofguts replied to the thread Flippy gas cap leaking........Hats off to the help. I have read so many threads on bad flippy caps and just wrote them off. No any more. They could make them the same...
-
BMs 201 C started leaking fuel today through flippy cap. Never had a problem with them. Rubber O ring is very loose. Do I need a new O...
-
BTune your saw under load in a good size log. Be sure it’s good and warmed up to operating temp. Get into a cut and lift the bar to take...
-
BShould be just like a regular two stroke, but you have to also take into account the lash on the valves - get those dialed in first then...
-
BThe crank failures werent due to a bushing, it was due to an improperly manufactured piston pin which has been changed in the current...
-
BI’ll take it Matt
-
B$1200 incl S&H seems fair. So no fuel through it at all?