bradb123's latest activity
-
BNice meeting you all, I enjoyed watching the teamwork to get the job done. Looked as if everyone had a good time I did. Hope to see you...
-
BWelcome, was my pleasure. And thank you and @bradb123 and @Woodrow for all the assistance you guys provide to help make it all...
-
BThat they are. @bradb123 has an entire herd of 572's and they are all quick. And they can do it all day too.
-
BHere's another, a 340 with 353 cylinder and HDA-198 carburetor mix and mashup that I did for fun. Sad that this series of saws is no...
-
BHere's a dandy that you don't see come along often, a beautifully restored Stihl 064. @jagreer1002 had @Glock37 powder coat the case...
-
BHere’s this saw in wood. I had run about a half tank of fuel through it when I did the video.
-
BHeres the ported cylinder all ready to be installed.
-
BI like to keep the muffler mod simple on these newer stihl saws. I cut away most of the stock outlet deflector. I open the stock...
-
BCouple pics of where the cylinder base needs to be clearanced. Final squish clearance came in at .0195”
-
BThe sides of the cylinder extension are flat so after cutting the base you have a small ridge left on each side that has to removed. I...
-
BStock port timing was I 75 T 120 E 100 With stock squish at .025” I choose to cut .040” from the squish band and .045” from the...
-
BSome random pics of the tare down
-
BHere’s the victim, fresh outta the box
-
BStill working great.
