bogieboy's latest activity
-
Bbogieboy replied to the thread STIHL The Official Stihl Chainsaws Thread.Looks like you are missing more than that.... i dont see an ms440, or 441 either..... 🤣🤣🤣 Heres the family photo, ms194t, ms280, ms261...
-
-
Bbogieboy reacted to Maintenance Chief's post in the thread STIHL The Official Stihl Chainsaws Thread with
Like.
Ran a tank through my new 500i. -
Bbogieboy replied to the thread STIHL The Official Stihl Chainsaws Thread.The big bore isnt even broken in yet, and with the mild port work i did (fixed the horrible transfers, fixed the offset oblong exhaust...
-
Bbogieboy replied to the thread STIHL The Official Stihl Chainsaws Thread.The big bore 460 got some fresh plastics today, farmertec air filter cover and engine shroud, and oem name plate... next is getting a...
-
-
Bbogieboy replied to the thread HELP! Track came off snowblower.Quick look up of your model, i would pull the nuts and washers that hold the drive and bogie wheelson, slip the tread over both, then...
-
Bbogieboy replied to the thread Rounded off driveshaft STIHL trimmer.Shoot, guess i am too late to the party.... find yourself a real dealer (not an ace) and have them warranty out the shaft and...
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.Wear, typically on the cam lobe in my experience. As for dropping pushrod out the bottom, thats from excess valve lash.... like .030"+...
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.Like EFSM said, there was a run of tight ones, but now they are usually loose, to the point of not allowing the compression release to...
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.Same.... as soon as that feeler slips freely in, it gets adjusted on mine, same goes with any that i work on... if i touch it, its...
-
Bbogieboy replied to the thread Who makes this chain.I was reading thru this thinking "tell me youre H.A.M. licensed without telling me your licensed"..... and then i got the the part where...
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.I use stihl hp ultra at 40:1... also, i am a certified stihl tech, so out of spec to me is different than most peoples idea of out of...
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.Normal usage, they go out of spec, and cause running issues, and harder starting.
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.Yep... if it runs it stays LOL it gets checked for wear about 2x a year and still looks good.... in that time i have had to adjust the...
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.I ha e been running my fs130 there for 8 yrs now, and have yet to foul/replace a spark plug, running hp ultra mixed at 40:1
-
Bbogieboy replied to the thread How exactly do you tune a 4mix?.Tune it just rich enough to not hit the limiter. I run a blade on my fs130, and tune it to just under the limiter
