Bob95065's latest activity
-
BI have two T435 powerheads I got in a saw lot. Powerheads are complete. $150
-
-
BBob95065 replied to the thread Husqvarna 562XP - A Tale of Woe.First thing I do too. I've had people bring me saws many times and said itcran when they put it on the shelf years before. First...
-
BBob95065 replied to the thread Husqvarna 562XP - A Tale of Woe.I matched the SKF numbers pn the bearings in addition to using the Husqvarna parts numbers in the IPL. The IPL lists the bearings per...
-
BBob95065 replied to the thread Husqvarna 562XP - A Tale of Woe.I forgot I have a question. I was talking to the tech at the shop about the mixture numbers on the printout. When it failed they were...
-
BBob95065 replied to the thread Husqvarna 562XP - A Tale of Woe.A couple Santa Cruz Mountain banana slightly that were on the driveway outside the garage. They only live on the west coast. This one...
-
-
BBob95065 replied to the thread Husqvarna 562XP - A Tale of Woe.Ok, an update. Last weekend I went to the dealer for parts. They had the bearings and seal in stock. The saw is not a Mark 2 and used...
-
-
BBob95065 replied to the thread Stihl workshop manuals.Looking for a IPL and shop manual for a Stihl HT73. Thanks!
-
BBob95065 replied to the thread Husqvarna 562XP - Any source for steel-caged bearings?.Yesterday before checking this board I went to the dealer. The PTO bearing was $20 and the flywheel side was $60. That Flywheel side...
-
-
BBob95065 replied to the thread 562xp Salvage.I got this saw with a scored piston not running. I'm reporting what I found so I really don't know the root cause of this problem.
-
BBob95065 replied to the thread 562xp Salvage.The short story is the flywheel bearing cage failed and only caused an air leak while running and under load. The carburetor threw as...
-
BBob95065 replied to the thread 562xp Salvage.I went through this last year. Saw held vacuum and pressure then suffered lean seizure. You can read the tale of woe here: 562 story
-
BBob95065 replied to the thread Husqvarna 562XP - A Tale of Woe.Yesterday I split the cases on the saw. The flywheel bearing failed which I didn't expect. You can see it here: Look at the spacing...
-
-
BI posted last summer about a 562XP failure that I experienced in this thread: Husqvarna 562XP - A Tale of Woe. In a nutshell it...
-
