bigbadbob's latest activity
-
Nice score!! I just rebuilt a friends 61, I really like those and 55s. I have the start of a 55, but would like to eventually get a 61 too! -
Today I bought a 61 Practica, P41, and a 910 for $80 total.
-
bigbadbob reacted to Partner's post in the thread Recent Wood Score Post your Pics Thread with
Like.
He also added a load for $130 because the equipment will be leaving my area in a few days -
I ended up basically trading an aftermarket block for some brand new AFR‘s, they look nice. The block was a lot more than I needed. I it...
-
Hmm. Without seeing the vid, just the noise would have had me wanting to check a radiator fan~water pump.
-
Ok Very experienced. Probably done it before. Old. 😆
-
Far from expert. Just a dummy with a couple wrenches is all.
-
fixed thanks that's what I told him poor kid. 4x4 auto tranny drop number two for same raisin. let's not try to rebuild the tranny...
-
It's either the starter drive bouncing off the flex plate or a cracked flex plate in my opinion. Remove the starter and see if the...
-
Srsly Ideas? Doesn’t seem metallic enough for a loose bolt
-
What’s that noise?! Ah mom you’re just jealous It’s a Che-vy noise!!
-
Transmission is back out of my Chevelle. I'll take it to work with me on Monday.
-
They are just a heat shield for the plug wires. You could stretch the spring a bit and pinch it so it's a bit tighter on the plug end or...
-
@redline4 This plug wrapper tube is rattling What gives? Fanks
-
GM has bearing drivers like that for most of their carrier bearings. I've been installing them like that for many years now without issue
