bigbadbob's latest activity
-
Any steel that conducts electricity will do 😎👍 One will rust more than the other 😉 -
Is your Stainless NONMAGNETIC? Did it accumulate rust? I have a fair size 120 VAC to 12VDC forklift battery charge I need to check out...
-
GOOD reading. Thank you for your efforts I have gleaned quite a few ideas that relate to my future project.
-
I have a 45 gallon plastic barrel where I have hung 4 strips of stainless steel I cut from a fridge door a old style constant amp...
-
When the air inlets, that can make this particular cast iron fireplace burn orange glowing hot when fed beech or ash, aren't delivering...
-
This might survive that…
-
I love love love the 372xpw. Today I found one like brand new. Bet it doesn't have 3 tanks through it. Came with 2. 28inch sugi light...
-
Yes, I think you are right. It looks very similar. I had never heard of those before. Thanks...
-
Google says 39-44 HRC for ISO 12.9 grade bolt steel, depending on level of factory quenching & tempering. Just an FYI
-
Shepherds axe is kinda what it looks like to me.
-
It has been a couple months since I did the fix and the hatchet got used and abused. The blade is holding up very well all things...
-
I have a basic understanding of steel hardening/quenching and tempering. I had a class in highschool regarding steel alloys and involved...
-
Here's a hand forged throwing hatchet/tomahawk I made a few years ago from a 24oz ball peen hammer head.
-
bigbadbob reacted to Duane(Pa)'s post in the thread Firewood thread!!! Let's see what you got!!!! with
Like.
I was thinking exact same thing! -
I sprayed it with Gibbs penetrating oil. I was going to make wood wedges to get below the jaws to put some pressure and keep spraying. I...
